ProBoat Miss Elam 1/12 Specifications download pdf (Page 6)

Section 1: Installing the Receiver and Transmitter Batteries

Receiver Batteries

m 1. Remove the two knurled aluminum

nuts that secure the cockpit as shown.

Pull the cockpit off the boat.

m 2. Carefully note how the exhaust

system is assembled.

m 3. Use a 2.5mm Allen wrench to remove

the tuned pipe mount as shown above.

m 4. Carefully remove the tuned pipe by sliding the

silicone coupler apart from the exhaust header.

m 5. Remove the clear lid that

covers the radio box.

m 6. Remove the dry cell battery holder from the

radio box and unwrap the foam around the

dry cell battery holder. Install 4 “AA” alkaline

batteries into it as shown. Note the proper

polarity. Wrap the battery box in foam.

Tuned Pipe Mount

Silicone Coupler

Tuned Pipe

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

ProBoat Miss Elam 1/12 Specifications Page 6