ProBoat Miss Elam 1/12 Specifications download pdf (Page 12)

Section 6: Maintenance

Lubrication

It is important to lubricate the flex shaft of

the Miss Elam, Pro Boat recommends genuine

Pro Boat Marine Grease and Grease Gun

(PRB0100), with silicone cable grease after

every two hours of operation. Do not forget to

do this. You can purchase this silicone grease

at your local hobby store. To lubricate the

drive shaft, follow these simple instructions.

m 1. Carefully note how the drive shaft and prop

are presently installed. This is important so that

when you have finished lubricating the drive

shaft, you can correctly re-install the drive shaft.

m 2. Loosen and remove the 1.5mm setscrew

that holds the propeller shaft. Remove the

propeller and shaft from the aluminum strut.

m 3. Insert a hex driver into the hole located on

the flywheel to lock the crankshaft in place. Then

use an 10mm wrench to loosen the collet nut.

Collet Nut

Collet

1.5mm Ferrule

Setscrew

Nylon Propeller

Washer

Drive Dog

Propeller Nut

Propeller

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

ProBoat Miss Elam 1/12 Specifications Page 12