ProBoat Endeavor EP Specifications download pdf (Page 13)

 3. With the radio system on, move the left

stick of your transmitter "down" to close

the sails. The sails should close, with the

jib sail being tighter than the main sail.

There should be some slack left in the sail

rigging when the sail gimbal moves the

sails in. There should also be enough

movement to turn on the motor switch

when the trim adjustment is moved to the

lower fully trimmed position.

 4. Bend the opening of each of the luft

rings after you have secured the main sail

to the mast, so they will not be pulled out

of the sail or from the mast.

Section 8 – Performance Tips

Replacement Parts

PRB2451................... Hull only: Endeavor

PRB2452................... Hatch: Endeavor

PRB2453................... Mast Set: Endeavor

PRB2454................... Boom Set: Endeavor

PRB3010................... Motor: Endeavor

PRB2456................... Drive Shaft Set: Endeavor

PRB2457................... Plastic Parts Set: Endeavor

PRB2458................... Rudder: Endeavor

PRB2459................... Pushrod Set: Endeavor

PRB2460................... Sails: Endeavor

PRB2461................... Power Switch: Endeavor

PRB2462................... Wiring Harness: Endeavor

PRB2463................... Boat Stand: Endeavor

PRB2181................... Screw Lock Pushrod Connector

PRB2183................... Rigging Line Clips

PRB2186................... Sail Luft Rings

PRB2187................... Pushrod Nylon Clevis

PRB2188................... Sail Boom Screw and Eyelet

PRB2407................... Plastic Parts Tree

PRB2409................... Rigging Line

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

ProBoat Endeavor EP Specifications Page 13